Chromatography Fittings
Analytical Sales & Services 40psi BPR Cartridge with Blue End Cap
40Psi Bpr Cartridge with Blue , Each/1.
IDEX Health & Science Upchurch PEEK Manifold Assembly 9 Port, for 1/8" OD
PEEK Manifold Assembly can be applied for a multi-Ports mixing chamber, combining several fluid streams into one or one stream split to several outlets. It can also be used as a gas sparging splitting unions or sample injection onto multi-well plates or a multiple direction flow path union. The manifold is manufactured from biocompatible PEEK giving it excellent chemical resistance. It has 9 Ports and is for 1/8"OD tubing. This assembly comes with Super Flangeless Fittings (9) P-331 and (9) P-359.
Waters Corp Waters Column Heater Inserts, 4 mm I.D., 30 cm Length
These column heater inserts are designed to provide consistent temperature control for chromatographic separations. They enable the use of specific column dimensions within compatible heating systems.
- Designed for 4 mm I.D. columns.
- Accommodates columns up to 30 cm in length.
- Ensures precise temperature management in column heater modules.
Analytical Sales & Services SS Tubing .005” X 1/16” X 10cm
This item has a minimum order quantity of 10 per supplier requirements. SS TUBING .005 X 10CM
Waters Corporation Sample Loop, 10 mL
This sample loop is designed for precise and reproducible sample introduction in chromatographic systems, ensuring accurate analysis. Its 10 mL capacity allows for handling a specific volume of sample.
- Ensures precise and reproducible sample introduction.
- Compatible with chromatographic systems.
- Features a 10 mL capacity.
Research Products International Corp Replacement Cap for Kimcole Bottle, White, 10/cs
Solid top polypropylene GL 45 screw thread caps have internal molded seal rings. Caps can be used with KimCote Media Bottles and Erlenmeyer Flasks. These caps are autoclavable.
Analytical Sales & Services 1 Piece Fingertight Flangeless Fitting
This item has a minimum order quantity of 7 per supplier requirements. 1 PC FINGT FLANGL FIT
Optimize Technologies OPTI-MAX™ Cartridge Check Valve Conversion Kit, 1/8" Ceramic Ball & Seat, SS Cartridge, Waters 100µL/Dual Head Systems
Make the switch to OPTI-MAX™ for less than ever before with OPTI-MAX™ Conversion Kits. Each kit includes all the OPTI-MAX™ check valve housings and cartridges you need to convert your HPLC instrument. By default, each kit includes our recommended stainless steel/ceramic OPTI-MAX™ cartridge (PEEK cartridges are supplied for biocompatible systems). However, if you'd like to substitute an alternate material the kit price will not be affected. These kits contain all the check valves you need for your HPLC pump grouped under a single part number.
Waters Corp Waters LockSpray Probe Tip Assembly, Replacement, Mass Spectrometry
This is a replacement LockSpray Probe Tip Assembly designed for use with specific Waters mass spectrometry instruments. It ensures proper functionality and maintenance of your analytical equipment.
- Replacement probe tip assembly
- Utilized on LCT Premier, Qtof Premier, Synapt Series, Xevo Qtof Series, Vion instruments
- Part of spare parts kits
Waters Corp Waters Performance Maintenance Kit, For 515 Pump, Annual, HPLC System
The Waters™ Performance Maintenance Kit for the 515 pump contains all the Waters Quality Parts™ necessary to keep the instrument operating at peak performance on an annual basis.
- Two Clear-100™ plunger seals
- Two standard sapphire plungers
- One solvent filter
- One diffuser
- Four PerformancePLUS™ Check Valve Cartridges
- Thin wall Teflon Tubing
Thomson Instrument Company SINGLE StEP Empty Column 50mL or 25g w/ Frit
Thomson Instrument Company SINGLE StEP Empty Columns (patented) are available in a wide range of sizes that allow for seamless connection to FPLC/LPLC/MPLC systems. These columns are designed for use with Gravity or FPLC/LPLC/MPLC (up to 200 PSI) in sizes that range from 10mL-650mL (4g – 300g). Both top & bottom connections are standard Luer fittings. Thomson also offers a 1.2L resin reservoir that simplifies column loading. The 1.2L reservoir screws directly to the top of 25g, 40g and 80g SINGLE StEP Empty Columns for easy loading of buffers, solvents and samples to minimize contamination and sample loss. A bottom frit is included with each SINGLE StEP Empty Column, matching top frits are available for purchase. Thomson manufactures its products in the USA to assure same day shipping.
Optimize Technologies Valco Union for 1/16" OD Tubing, w/ Nuts & Ferrules, .029" Thru
We realize that your time is valuable and should not be wasted worrying about fittings. For this reason, all Optimize fittings are precision machined in the USA for optimal quality and thread consistency. The machining process is the best way to ensure tight manufacturing tolerances and minimal product variance
Waters Corporation Compression Screw, 1/8 in, PEEK, Fitting
This compression screw is a 1/4-28 flangeless compression screw with an inner diameter of 1/8 " It is used for locking style degasser fittings.
- Made from PEEK material.
- Designed as a fitting.
- Compatible with HPLC and UPLC systems.
- Supplied as 1 unit per package.
- Features a 1/4-28 flangeless design.
- Used for locking style degasser fittings.